1050 Speakers; Speakers - Lenovo ideapad 100S-11IBY Hardware Maintenance Manual

Lenovo ideapad 100S-11IBY Hardware Maintenance Manual

1050 Speakers

For access, remove these FRUs in order:
• "1010 Base cover" on page 32
• "1020 Battery pack" on page 34
• "1040 Touchpad button board" on page 37
Figure 5. Removal steps of speakers
Peel off the adhesive tape that secure the speaker cable 1.
1
Detach the speaker connector in the direction shown by arrow 2 and release
the cables. Then remove the speakers in the direction shown by arrows 3.
3
2
3
When installing: Route the cables along the cable guides. As you route the
cables, make sure that they are not subjected to any tension. Tension could
cause the cables to be damaged by the cable guides, or a wire to be broken.
Make sure that the speaker connector is attached firmly.
38