1030 Io Board; Usb 2.0 - Lenovo ideapad 100S-11IBY Hardware Maintenance Manual

Lenovo ideapad 100S-11IBY Hardware Maintenance Manual

1030 IO board

For access, remove these FRUs in order:
• "1010 Base cover" on page 32
• "1020 Battery pack" on page 34
Figure 3. Removal steps of IO board
Detach the IO board connector in the directions shown by arrows 1 and 2.
Remove the screws 3. Then remove the IO board in the direction shown by
arrow 4.
When installing: Make sure that the connector is attached firmly.
36
Step Screw (quantity)
M2 x 3 mm, Phillips-head, nylok-coated (2)
3
USB
4
Color Torque
Black 2.0 kgf/cm