Table of Contents
Advertisement
Hardware Overview (continued)
1.
WPS: WPS button for wireless WPS-PBC setup method.
2.
Antenna: Connect to antenna for wireless network.
3.
Reset: Keep pressing 6 seconds to restore DVG to be factory
default.
Installing the Hardware
A. Insert one end of the Ethernet cable into the Ethernet (LAN) port on
the back panel of the DVG-N5402FF and the other end of the cable
to an Ethernet Adapter or available Ethernet port on your computer.
B. Insert one end of the Ethernet cable into the WAN port on the back of
the DVG-N5402FF and the other into your cable/DSL modem or the
LAN port of your router.
4
Advertisement
Table of Contents
