Using Network Function; Necessary Environment For Computers To Be Connected; Example Of Network Connection - Panasonic TH-43LFE8U Operating Instructions Manual

Using Network
Function
This unit has a network function and you can control the
Display connected to the network using your computer.
Necessary environment for
computers to be connected
First of all, confirm your computer whether it has a wired
LAN or a built-in wireless LAN.
Before connecting the Display to the computer, be sure
to check the following settings.
Check 1: About LAN cable
●
Is the cable connected properly?
●
To connect a device using 100BASE-TX, use LAN
cable that is compatible with category 5 or above.
Check 2: LAN settings
Computer with a built-in LAN function
●
Is your LAN switched on?
Computer without a built-in LAN function
● Is your LAN adapter recognized properly?
●
Is your LAN adapter switched on?
●
Install the LAN adapter driver beforehand.
For details on how to install the driver, refer to the
instructions accompanying the LAN adapter.
■
About Web Browser
Web Browser is necessary to use WEB control.
●
Compatible OS:
Windows XP / Windows Vista / Windows 7 /
Windows 8,
Mac OS X v10.4 / v10.5 / v10.6, OS X v10.7 / v10.8
● Compatible Web Browser:
Internet Explorer 7.0 / 8.0 / 9.0 / 10.0,
Safari 4.x / 5.x / 6.x (Mac OS)
64
English

Example of network connection

Note
●
To use the network function, set each item in
[Network settings] and make sure to set [Network
control] to [On].
(see page 55)
When it is set to [On], power indicator lights orange
under the condition of power "Off" with remote control
(stand-by state).
■
LAN Terminal connection
Back of the Display
COMPUTER
LAN Terminal
LAN cable (not supplied)
Hub or broadband router
Note
●
For LAN cable, use shielded cable, otherwise picture
noise may be caused.
●
Make sure the broadband router or hub supports
10BASE-T/100BASE-TX.
●
Touching the LAN Terminal with a statically charged
hand (body) may cause damage to the device due to
its discharge.
Do not touch the LAN Terminal or the metal part of
the LAN cable.
●
For instructions on connection, consult your network
administrator.