Menu Language; Date And Time; Auto Power Off - Leica S Instructions Manual

PRESETS
EN
CAMERA DEFAULT SETTINGS

Menu language

The language used in the default setting of the menu control is English.
, , , ,
German French Italian Spanish Russian
, and
Chinese Simp. Korean Portuguese
tive menu languages.
Setting the function
1. In the menu, under , select the item
SETUP
2. select the desired language in the sub-menu.
• Apart from a few exceptions (button names, short designations),
all linguistic information changes.
20

Date and time

Date
There are 3 options available for the sequence of the date.
Setting the function
1. In the menu, under
, , ,
Japanese Chinese T rad.
2. call up the sub-menu
can also be selected as alterna-
3. Select
the corresponding sub-menu
4. To change the representation,
Year/Month/Day
and
Language
thumbwheel with the header line active.
5. Pressing the Joystick to the left or right takes you out of the marked
header line to the three setting fields below, or back to the header
line.
6. In the respective marked setting field, make the settings by pressing
the Joystick up or down or by turning the rear thumbwheel.
7. Confirm and save the settings by pressing the button marked
this case at the bottom right next to the monitor
, select the item
SETUP Date & Time
and call up
Date Setting
,
Day/Month/Year Month/Day/Year
, press the Joystick up or down or turn the rear
Time
Setting the function
In sub-menu item
Time Setting
cal groups and for the representation in essentially the same way as
described in the previous section for the date.
and
Of the other three items in the
are activated or deactivated by pressing the rear
Daylight Saving Time
thumbwheel or the Joystick forward or to the right, while under
the desired location is selected from the list in the corresponding menu
, or
by turning the rear thumbwheel or pressing the Joystick up or down.
Notes:
• is only available when the GPS function is switched on,
Auto GPS Time
and
Time Zone Daylight Saving Time
function is switched off.
• Even if no battery is inserted or the battery is discharged, the date and
time settings are retained for roughly three months by an integrated
in
OK
back-up battery (see also "Charge level displays"). After that period,
however, the date and time must be set again as described above.

Auto power OFF

This function turns the camera off automatically after a preset time. This
state corresponds to the main switch position
Setting the function
1. In the menu, under
SETUP
2. set the desired time
Note:
Even if the camera is in standby mode, i.e. the displays have gone out or
the activated
Auto Power Saving
reactivated at any time by pressing the shutter button.
the settings are made for both the numeri-
sub-menu, and
Date & Time Auto GPS Time
Time Zone
are only available when the GPS
.
Off
, select the item and
Auto Power Saving
function has turned it off, it can be