6.4 Copying scenes, programs and records
With the Copy-function, you can make programming of programs and chasers easier by copying already
existent scenes into a program.
Copy a scene
Press and hold the Program-button and select the desired program via the Bank-buttons. Press the
respective Scene-button. Press the Add-button and select the desired bank where you want to copy the
scene to. Press the desired Scene-button.
Delete a scene
Press and hold the Program-button and select the desired program via the Bank-buttons. Press the
respective Scene-button. Press and hold the Del-button and press the desired Scene-button. The DMX-
value of this scene is set to 0.
Copy a program
Press and hold the Program-button and select the desired program via the Bank-buttons. Press the Add-
button and select the desired bank where you wish to copy the program to. Press the Bank Copy-button.
Delete a program
Press and hold the Program-button and select the desired program via the Bank-buttons. Press and hold the
Del-button and press the Bank Copy-button.
Delete all scenes
Caution: When you select this function, all programmed scenes will be irrevocably lost!
Press and hold the Program-button and the Bank Down-button while disconnecting the device from the
mains. Connect the device to the mains again.
6.5 Sound-control
You can activate the sound-control by pressing the Music-button (LED flashes). Please note that programs
and records are only active in this mode when the controller receives a music-signal. If there is no music
present, the program or chaser stops.
6.6 MIDI-operation
Press the MIDI-button and the third and fourth digit in the display start flashing. Select the respective MIDI-
channel via the Bank-buttons. Press the MIDI-button again in order to terminate the adjustment of the MIDI-
channels.
Overview on the MIDI-functions:
Bank
Note-
number
00
01
02
03
Bank 1
04
05
06
07
08
09
Bank 2
10
...
Function
Scene 1
Scene 2
Scene 3
Scene 4
Scene 5
Scene 6
Scene 7
Scene 8
Scene 1
Scene 2
Scene 3
...
Bank
Note-
number
Bank 15
112
Bank 15
113
Bank 15
114
Bank 15
115
Bank 15
116
Bank 15
117
Bank 15
118
Bank 15
119
Chase
120
Chase
121
Chase
122
Chase
123
Chase
124
Chase
125
Chase
126
19
Function
Scene 1
Scene 2
Scene 3
Scene 4
Scene 5
Scene 6
Scene 7
Scene 8
Chase 1
Chase 2
Chase 3
Chase 4
Chase 5
Chase 6
Blackout
Need help?
Do you have a question about the DMX OPERATOR and is the answer not in the manual?
Questions and answers