Panasonic SDR-H250EB Operating Instructions Manual page 103

LSQT1211(PAL_ENG).book 103 ページ ２００７年２月１３日 火曜日 午後１時１４分
With a computer
Downloaded From VideoCamera-Manual.com Manuals
Problem
≥ The USB function selection screen does not appear if the USB
Even if connected by the
USB cable, this unit is not
≥ Select another USB terminal on the computer.
recognised by the
≥ Check the operating environment. (l 78)
computer.
≥ Disconnect the USB cable, turn the unit off then on and then
An image that should ≥ If there are multiple drives, a drive other than this unit may be
have been recorded does
not appear when
ImageMixer3 is started.
When the USB cable is
disconnected, an error ≥ To disconnect the USB cable safely, double-click the
message will appear on
the computer.
≥ To create DVD-Video discs using the DVD COPY function, you
The DVD COPY function
will not start even when I
≥ The DVD COPY function cannot be used in the video recording
press the DVD COPY
button.
≥ Have you already copied those images using the DVD COPY
I cannot copy images
using the DVD COPY
function.
It takes a long time to ≥ Creating a DVD may take some time when the size of the
create a DVD.
The amount of free space
≥ The unit's image data is not automatically deleted even when
on the HDD or SD card
does not increase even
when the images are
backed up on the
computer or DVD discs.
The DVD player cannot
≥ To playback a DVD disc created using ImageMixer3, the player
play back the discs I have
created using
ImageMixer3.
The DVD-RAM disc
≥ If a DVD-RAM driver is installed in your computer, uninstall it.
cannot be recognised.
Check points
cable is connected while the menu screen is displayed.
# Close the menu screen before connecting the USB cable.
reconnect the USB cable.
selected.
# HDD: Select [SDR-H250] or [SDR-H20] from [Source].
SD card: Select [Removable Disk] from [Source].
in the task tray and follow the instructions on the screen.
need to install ImageMixer3 for Panasonic from the supplied
CD-ROM to your computer. (l 81)
mode or picture recording mode.
# Rotate the mode dial to select
DVD COPY button.
function?
# Once images have been copied using the DVD COPY function,
they cannot be copied a second or subsequent time.
Import the images into ImageMixer3, and then write them on the
DVD disc. (l 87)
motion picture files are small.
you have imported images to your computer or onto DVD
discs using ImageMixer3.
# To increase the amount of free space on the HDD or SD card,
delete unnecessary images recorded on this unit. (l 61, 66)
must support playback of that DVD disc. (Refer to the
operating instructions of the player.)
Others
icon
or , then press the
103
LSQT1211