Actions On Print Quality Problems - TallyGenicom TG8008 User Manual

TallyGenicom 8008 Color Laser Printers User Guide

6.3 Actions on Print Quality Problems

Below are given some possible print problem and possible cures.
Overall print is lighter than normal print, fill area on graphics show blank
areas, white stripes appear in the printout, or small characters or hairlines do
not print sharp.
Possible cause
A toner cartridge is becoming
empty.
More than one sheet has been
picked.
The media is damaged or
extremely dry.
The media is not in compli-
ance with the printer's specifi-
cations.
The media type specified on
the printer driver is incorrect.
Save Toner is enabled on the
printer driver.
The print mode on the printer
driver is set to Standard or
High Speed.
The original graphic image is
light in itself.
* Also see "Chapter 5 Printer Driver".
Projections are dark or blurry (OHP film or transparency).
Toner has peeled off. (thick paper or label)
Printout is too glossy. (Plain paper)
Possible cause
An incorrect media type is
specified on the printer driver.
6-18
Action
This symptom may occur when print-
ing a large image. Replace the appro-
priate toner cartridge.
Print again.
Use new print media fresh from its
package.
Use the media in compliance with the
printer's specifications.
Change the media type setting to the
correct one.
Turn off Save Toner.
Set the print mode to High Quality.
Increase the density value on the
printer driver.
Action
Match the media type with the print
media.
Page
8-4
–
3-5
3-4
4-9 *
4-9 *
4-9 *
4-9 *
Page
4-9 *