Siemens RUGGEDCOM RX1500 Installation Manual page 24

Chapter 3
Communication Ports
CAUTION!
Contamination hazard – risk of damage to equipment. M12 modules are shipped with internal O-rings
and dust caps to prevent the ingress of dirt and debris that may damage the port. Make sure the O-
rings and dust caps are installed on all unused M12 ports.
Figure 15: 2 × 10/100/1000TX with RJ45 Ports (CG01)
Figure 17: 2 x 8-Pin 10/100/1000TX with M12 A-Coded
Ports (CG03)
Figure 19: 2 x 8-Pin 10/100/1000TX with M12 X-Coded
Ports (CG04)
Figure 21: 4 x 8-Pin 10/100TX with M12 A-Coded Ports
(4TX03)
Figure 23: 4 x 4-Pin 10/100TX M12 D-Coded Ports
(4TX04)
Each port features an LED that indicates the state of the port.
State
Green (Solid)
Green (Blinking)
18
Figure 16: 6 × 10/100TX with RJ45 Ports (6TX01)
Figure 18: 2 x 8-Pin 10/100/1000TX with M12 A-Coded
Bypass Ports (CG03B)
Figure 20: 2 x 8-Pin 10/100/1000TX with M12 X-Coded
Bypass Ports (CG04B)
Figure 22: 4 x 8-Pin 10/100TX with M12 A-Coded
Bypass and Non-Bypass Ports (4TX03B)
Figure 24: 4 x 4-Pin 10/100TX with M12 D-Coded
Bypass and Non-Bypass Ports (4TX04B)
Description
Link established
Activity
RUGGEDCOM RX1500
Installation Guide
Copper Ethernet Ports