Table of Contents
Advertisement
4-2 Display > Pilot
Pilot displays
22
Displays an advanced autopilot display with essential autopilot data.
Display area
Function
Data
Customizable data cells. Each display page has a separate
Header
header configuration. Default: Voltage, Current, Alarm Status
(see section 5).
Heading
Large digits show the heading of the vessel
Drive
Left and right boxes 'fill up' to indicate when the autopilot is
indicators
driving the rudder and how much power is being used by the
drive system
Numerical
Customizable data cells. Default: Course to steer, Course error.
data panels
Bar data
Customizable indicator bar. Default: Automatically switches
panels
between Rudder angle, Course error and Cross track error.
Mode panel Left hand side: shows the steering mode (COMPASS, GPS, WIND)
Right hand side: shows the operating mode (Standby, Auto,
H-Steer) inside a colored tab.
Panel changes to blue when in AUTO mode. The colored tab
is yellow in STBY mode, green in AUTO mode, magenta in
H-STEER mode and red when there is a critical alarm.
Options menu:
Header Menu for configuring the data header in this display (see section 5).
Data setup Enters the data set-up mode. Use the Control Dial to highlight a data
cell, press
to display a list of data types that can be displayed in that cell.
Northstar NS3300 Pilot
Advertisement
Table of Contents
