Nikon D300 User Manual page 143

Exposure and Flash Bracketing
1
Select flash or exposure bracketing.
Choose the type of bracketing to be
performed using Custom Setting e5
([Auto bracketing set], pg. 297). Choose
[AE & flash] to vary both exposure and
flash level (the default setting), [AE only]
to vary only exposure, or [Flash only] to vary only flash level.
2
Choose the number of shots.
Pressing the Fn button, rotate the main command dial to
choose the number of shots in the bracketing sequence. The
number of shots is shown in the control panel.
Fn button
At settings other than zero, a M icon
and exposure and flash bracketing
indicator will be displayed in the
control panel, and a E icon will blink in
the viewfinder.
Main command
dial
Number of shots
Control panel
Exposure and flash
bracketing indicator
Z
117