FCC COMPLIANCE STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC INFORMATION : This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. . Do not block any ventilat ion openings. Install in accord ance with the manufacturer`s instructions. 6. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Page 5
2.8 ~ 12 mm Vari-focal lens 6.0 ~ 50 mm Vari-focal lens IMPORTANT : The user of this camera is responsible for checking and complying with local, state, and federal laws and statues concerning the recording and monitoring of audio signals.
Page 6
2.8 ~ 12mm or 6 ~ 50mm Vari-focal lens for wide area monitering. Dual Type => 24V AC input / 12V DC input power source from a DC 12V or AC 24V ± 10% 60/50Hz ± 1Hz Use Certified/Listed Class 2 power source only. DC 12V Type =>...
Page 7
Sunshield bolt Sunshield Sunshield Manual Accessory Camera Sunshield bolt Screw x 3ea...
Page 15
Dual Type DC 12V Type 530mA(7.0Watts) 500mA(6.0Watts) 1/3" 960H CCD NTSC : 1020(H) x 508(V) / PAL : 1020(H) x 596(V) NTSC : 976(H) x 494(V) / PAL : 976(H) x 582(V) NTSC : / PAL : NTSC : / PAL : Camera Control OSD (Joystic Switch) Lens...
Need help?
Do you have a question about the KCB-7500ND and is the answer not in the manual?
Questions and answers