Operation; Think Safety First; Using The Rollover Protection System (Rops) - Toro TITAN ZX 4800 Operator's Manual

Model no. 74851-serial no. 314000001 and up model no. 74852-serial no. 314000001 and up model no. 74853-serial no. 314000001 and up model no. 74855-serial no. 314000001 and up
Hide thumbs Also See for TITAN ZX 4800:
Table of Contents

Advertisement

Operation

Note: Determine the left and right sides of the machine
from the normal operating position.

Think Safety First

Please carefully read all of the safety instructions and decals
in the safety section. Knowing this information could help
you, your family, pets, or bystanders avoid injury.
DANGER
Mowing on wet grass or steep slopes can cause
sliding and loss of control.
Wheels dropping over edges can cause rollovers,
which may result in serious injury, death or
drowning.
A loss of traction is a loss of steering control.
To avoid loss of control and possibility of rollover:
• Do not mow near drop-offs or near water.
• Do not mow slopes greater than 15 degrees.
• Reduce speed and use extreme caution on
slopes.
• When mowing slopes, gradually work from
lower to higher areas on the incline.
• Avoid sudden turns or rapid speed changes.
• Turn up, into an incline when changing
directions on slopes. Turning down the slope
reduces traction.
• Attachments change the handling characteristics
of the machine. Use extra caution when using
attachments with the machine.
1
2
3
1. Safe Zone-use the machine here
2. Use walk behind mower and/or hand trimmer near drop-offs
and water.
3. Water
G015033
Figure 6
Using the Rollover Protection
System (ROPS)
WARNING
To avoid injury or death from rollover: keep the roll
bar installed and use the seat belt.
WARNING
There is no rollover protection when the roll bar is
removed.
• Drive slowly and carefully.
• Check carefully for overhead clearances (i.e.
branches, doorways, electrical wires) before
driving under any objects and do not contact
them.
14

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Titan zx6000Titan zx 5400

Table of Contents