Inserting The Tool - wurth BM 13-XE Instructions Manual

BM_SB 13-XE.book Seite 11 Montag, 12. April 2010 3:27 15
Use as Intended
BM 13-XE:
The drill is designed for drilling in wood, metal,
ceramic and plastic.
Part number
Nominal power
Output power
No-load speed
- 1st gear
- 2nd gear
Speed under load
- 1st gear
- 2nd gear
No-load impact frequency (max.)
Rated impact frequency (max.)
Spindle lock
Cable replacement (Quik-Lok)
Reversible
Drill dia. in concrete
Drill dia. in brick and lime sand
Drill dia. in steel
Drill dia. in softwood
Chuck clamping range
Drill spindle threads
Clamping collar
Weight (excl. mains cable and drill chuck)
Safety class

Inserting the Tool

Drill Spindle Locking
For the easy and quick changing of the tools or the
drill chuck, the machine has a drill spindle locking
device which eliminates the need to hold the drill
spindle by hand or with a tool.
SB 13-XE:
The machine is intended for impact drilling in brick,
concrete and stone as well as for drilling in wood,
metal, ceramics and plastics.
The user is responsible for damage caused by usage
other then intended.
Tool Specifications
Drill BM 13-XE
702 321 X
600 W
300 W
-1
0 – 900 min
0 – 2500 min
-1
0 – 520 min
0 – 1500 min
–
–
•
•
•
–
–
13 mm
40 mm
1.5 –13 mm
" × 20 UNF
1 /
2
43 mm
2.0 kg
/II
Inserting the tool
For this purpose, Open chuck, insert the selected bit
and tighten chuck. After the clamping jaws have
tightened around the tool shaft, turn the chuck a
further 1/4 in order to let the chucking power reten-
tion engage (pos. ; 1x click).
Impact drill SB 13-XE
702 322 X
750 W
375 W
0 – 1200 min
-1
0 – 3400 min
-1
0 – 750 min
-1
0 – 2100 min
51000
31500
•
•
•
20 mm
22 mm
13 mm
35 mm
1.5 –13 mm
" × 20 UNF
1 /
2
43 mm
2.0 kg
/II
-1
-1
-1
11