(Frozen when raw or after being boiled)
How to use
1 Install parts on the motor housing and assemble the lid. (P. GB12-14)
2 Prepare ingredients. (P. GB15-16)
3 Place containers under the juice spout and pulp spout.
When using the frozen attachment, placing the pulp container is
4 Insert the mains plug into a house hold mains socket.
feeding tube slowly and
push them down by using
the food pusher.
Feed ingredients little by little
approximately every 5 seconds.
When using more than one kind of
ingredients, feed them little by little
Do not force to push ingredients into
the feeding tube.
In the case of jamming of ingredients
(REVERSE) button for several seconds
After extracting is completed,
and close the spout cap.
Pull out the mains plug.
Use the tip of cleaning brush to remove the pulp from juice spout and pulp spout.
Remove parts and clean them. (P. GB18-19)
Do not move the juicer by holding the lid or juicing bowl. (Dropping parts may cause injury.)
Depending on ingredients (especially hard ingredients), their pulp may mix into the juice.
If pulp is disturbing your drink, strain your drink.
When pulp is not coming out or pulp is accumulating back of the pulp spout and top of the juice attach-
ment, turn the switch off and remove them.