Bosch AGS 7,2 LI Original Instructions Manual page 26

26 | English
Note: To ensure long and reliable service, carry
out the following maintenance regularly.
Regularly check for obvious defects such as loose
fixings, and worn or damaged components.
Check if guards and protective devices are un-
damaged and properly mounted. Before using,
carry out possibly necessary maintenance and
repairs.
If the garden product should happen to fail de-
spite the care taken in manufacture and testing,
repair should be carried out by an authorised
customer service agent for Bosch garden prod-
ucts.
In all correspondence and spare parts orders,
please always include the 10-digit article
number given on the type plate of the garden
product.
Blade Maintenance
Always clean the cutting blades after operation
and lubricate with Bosch Maintenance spray.
During longer cutting jobs, we recommend peri-
odically lubricating the cutting blade with Bosch
Maintenance spray.
Visually check the condition of the cutting edges
of the cutting blade.
Ensure that the cutting blade is covered with the
blade guard supplied when not in use.
Changing the Blade (see figures F1
Warning! Switch off before adjusting or
cleaning. The blades continue to move for a
few seconds after the garden product is
switched off.
Caution! Do not touch the moving blades.
Always wear protective gloves when using,
adjusting or cleaning the garden product.
Do not do the blade change without blade
covers.
Blade Removal (see figures F1–F3)
Push the SDS release button 8 on both
sides.
The SDS drive cover 16 opens.
Pull out the blade 1.
F 016 L70 608 | (27.1.10)
Blade Fitting (see figures F4 – F5)
Push the blade 9 in till it clicks in position.
Push the SDS drive cover 16 towards the
garden product till the SDS release button 8
clicks in position.
After Use/Storage
Warning! Switch off before adjusting or
cleaning. The blades continue to move for a
few seconds after the garden product is
switched off.
Caution! Do not touch the moving blades.
Always wear protective gloves when using,
adjusting or cleaning the garden product.
Clean the exterior of the garden product thor-
oughly using a soft brush and cloth. Do not use
water, solvents or polishes. Remove all debris.
Ensure that the cutting blade is covered with the
blade guard supplied when not in use.
Store the garden product in a secure, dry place
out of the reach of children. Do not place other
objects on top of the garden product.
Accessories
Grass shear blade with 80 mm width is not
recommended for garden product
AGS 10,8 LI.
Grass shear blade, 80 mm . . . . . 2 609 003 884
F5)
–
Grass shear blade, 100 mm . . . . 2 609 003 867
Shrub shear blade, 110 mm. . . . 2 609 003 885
Shrub shear blade, 200 mm. . . . 2 609 003 868
Pole cart. . . . . . . . . . . . . . . . . . . 2 609 003 869
Lubricant spray, 250 ml . . . . . . . 1 609 200 399
Bosch Power Tools