Table of Contents
Advertisement
Setting
Real Cinema or Film
Mode
Colour Gamut
Edge Enhancer
xvYCC
Expert Pattern
Colour Filter
Colour Temperature
Colour Management
System
Downloaded From TV-Manual.com Manuals
Makes video clips recorded in film look more natural by eliminating judder effect.
Uses this function when you watch film-originated movie contents.
This function can also work when TruMotion is off.
LED LCD TV / LCD
Advanced Control
»
y
TV
»
y
»
y
Expert Control
Displays colour domain of the signal.
»
y
»
y
»
y
»
y
»
y
Plasma TV
Advanced Control, Expert Control
»
y
»
y
»
y
Photo mode
»
y
»
y
Shows clearer and distinctive yet natural edges of the video.
This function works well over Sharpness UI 60 value.
This feature is not available for all models.
This is produces richer colours.
This feature represents rich colours as much as a conventional video signal.
This function is enabled in "Picture mode - Cinema, Expert" when xvYCC signal is inputted
through HDMI.
This is the pattern used for expert adjustment.
This function is enabled in "Picture Mode - Expert" when you watch DTV.
This is the function to filter the specific colours of the video.
You can use the RGB filter to set colour saturation and hue accurately.
Adjusts the overall colour of the screen by changing the white baseline.
LED LCD TV / LCD
a. Method : 2 Points
TV
Pattern: Inner, Outer
y
y
Red/Green/Blue Contrast, Red/Green/Blue Brightness: The adjust-
y
y
ment range is -50 to +50.
b. Method : 10 Point IRE
Pattern: Inner, Outer
y
y
IRE (Institute of Radio Engineers) is the unit to display the size of
y
y
the video signal and can be set among 10, 20, 30 to 100. You can
adjust Red, Green or Blue according to each setting.
Luminance: This function displays calculated luminance value for
y
y
2.2 gamma. You can input luminance value you want at 100 IRE,
than the target luminance value for 2.2 gamma is displayed at
every 10 steps from 10 IRE to 90 IRE.
Red/Green/Blue: The adjustment range is -50 to +50.
y
y
c. Apply to all inputs
Plasma TV
a. Method : 2 Points
Pattern: Inner, Outer
y
y
Red/Green/Blue Contrast, Red/Green/Blue Brightness: The adjust-
y
y
ment range is -50 to +50.
b. Method : 20 Point IRE
Pattern: Inner, Outer
y
y
IRE (Institute of Radio Engineers) is the unit to display the size of
y
y
the video signal and can be set among 5, 10, 15 to 100. You can
adjust Red, Green or Blue according to each setting.
Red/Green/Blue: The adjustment range is -50 to +50.
y
y
c. Apply to all inputs
As the tool used by the experts to make adjustments by using the test patterns, this does not
affect other colours but can be used to selectively adjust the 6 colour areas (Red/Green/Blue/
Cyan/Magenta/Yellow).
Colour difference may not be distinctive even when you make the adjustments for the general
video.
Adjusts Red/Green/Blue/Yellow/Cyan, Magenta.
Red/Green/Blue/Yellow/Cyan, Magenta Colour: The adjustment range is -30 to +30.
»
y
Red/Green/Blue/Yellow/Cyan, Magenta Tint: The adjustment range is -30 to +30.
»
y
This feature is disabled in RGB-PC and HDMI-PC mode.
Description
Maximizes the utilization of colour to increase colour quality.
Standard: Displays standard set of colours.
Wide: Increase number of colours used.
Standard: Displays standard set of colours.
Wide: Increase number of colours used.
EBU: Mode to display EBU standard colour area.
SMPTE: Mode to display SMPTE standard colour area.
BT709: Mode to display BT709 standard colour area.
Maximizes the utilization of colour to increase colour quality.
Standard: Displays standard set of colours.
Wide: Increase number of colours used.
Wide: Increase number of colours used.
sRGB: Mode to display sRGB standard colour gamut.
CUSTOMIZING SETTINGS
99
Advertisement
Table of Contents
