Table of Contents
Advertisement
18
ASSEMBLING AND PREPARING
Securing the TV to a table
Only 32/37LV37 **
Fix the TV to a table to prevent from tilting forward,
damage, and potential injury.
Mount the TV on a table, and then insert and
tighten the supplied screw on the rear of the stand.
WARNING
To prevent TV from falling over, the TV
y
y
should be securely attached to the floor/
wall per installation instructions. Tipping,
shaking, or rocking the TV may cause
injury.
Downloaded From TV-Manual.com Manuals
Securing the TV to a wall
(This feature is not available for all models.)
1
Insert and tighten the eye-bolts, or TV brackets
and bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2
Mount the wall brackets with the bolts to the
wall.
Match the location of the wall bracket and the
eye-bolts on the rear of the TV.
3
Connect the eye-bolts and wall brackets tightly
with a sturdy rope.
Make sure to keep the rope horizontal with the
flat surface.
CAUTION
Make sure that children do not climb on
y
y
or hang on the TV.
NOTE
Use a platform or cabinet that is strong
y
y
and large enough to support the TV
securely.
Advertisement
Table of Contents
