Table of Contents
Advertisement
8
ASSEMBLING AND PREPARING
CAUTION
Do not use any unapproved items to ensure the safety and product life span.
y
y
Any damages or injuries by using unapproved items are not covered by the warranty.
y
y
NOTE
The items supplied with your product may vary depending on the model.
y
y
Product specifications or contents of this manual may be changed without prior notice due to upgrade
y
y
of product functions.
How to use the ferrite core (Only Plasma TV)
y
y
1 Use the ferrite core to reduce the electromagnetic interference in the PC audio cable.
Wind the PC audio cable on the ferrite core thrice. Place the ferrite core close to the TV.
[to an External device]
2 Use the ferrite core to reduce the electromagnetic interference in the power cable.
Wind the power cable on the ferrite core once. Place the ferrite core close to the TV and a wall plug.
[to a wall plug]
3 Use the ferrite core to reduce the electromagnetic interference in the LAN cable. Wind the LAN
cable once on the small ferrite core and thrice on the big ferrite core. Place the ferrite core close to
the TV.
[to an
External
device]
- If there are two ferrite cores, follow as shown in Figures 3(1).
- If there are three ferrite cores, follow as shown in Figures 1 and 3(1).
- If there are six ferrite cores, follow as shown in Figures 1, 2 and 3(2).
For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick
y
y
and 18 mm width. (Only 32/37/42/47LV37 ** )
Downloaded From TV-Manual.com Manuals
[Figure 1]
[Figure 2]
A
A
(1)
(2)
[Figure 3]
*A
10 mm
*B
18 mm
10 mm(+ / - 5 mm)
[to the TV]
[to the TV]
[to the TV]
B
(Gray)
[Cross Section of
Ferrite Core]
(Black)
[Cross Section of
Ferrite Core]
A (Gray) B (Gray)
[Cross Section of
Ferrite Core]
Advertisement
Table of Contents
