Table of Contents
Advertisement
98
CUSTOMIZING SETTINGS
Basic image options
Setting
Backlight
(Only LED LCD TV /
LCD TV)
Contrast
Brightness
Sharpness
Colour
Tint
Colour Temp.
Advanced Control or
Expert Control
Picture Reset
NOTE
y
y
It is not available to use this function in Intelligent Sensor,
You cannot adjust colour, sharpness and tint in the RGB-PC/HDMI-PC mode.
y
y
When the Expert 1/2 is selected, you can select Backlight, Contrast, Brightness, H Sharpness, V Sharp-
y
y
ness, Colour or Tint.
Advanced image options (Depending on model)
Setting
Dynamic Contrast
Dynamic Colour
Clear White
Skin Colour
Noise Reduction
Super Resolution
MPEG Noise Reduc-
tion
Gamma
Black Level
Eye Care
Downloaded From TV-Manual.com Manuals
Adjusts the brightness of the screen by controlling the LCD backlight. If you decrease the
brightness level, the screen becomes darker and the power consumption will be reduced with-
out any video signal loss.
NOTE
If you use the "Energy Saving - Off, Minimum, Medium", Backlight will be available.
y
y
Increases or decreases the gradient of the video signal. You may use Contrast when the
bright part of the picture is saturated.
Adjusts the base level of the signal in the picture.
Adjusts the level of crispness in the edges between the light and dark areas of the picture.
The lower the level, the softer the image.
Adjusts intensity of all colours.
Adjusts the balance between red and green levels.
Set to warm to enhance hotter colours such as red, or set to cool to enhance cooler colours
such as blue.
Customizes the advanced options.
Restores the options of each mode to the factory default.
Adjusts the contrast to keep it at the best level according to the brightness of the screen. The
picture is improved by making bright parts brighter and dark parts darker.
Adjusts screen colours so that they look livelier, richer and clearer. This feature enhances
hue, saturation and luminance so that red, blue and green white look more vivid.
Make the white area of screen brighter and more white.
It detects the skin area of video and adjusts it to express a natural skin colour.
Reduces screen noise without compromising video quality.
Provides a crystal-clear picture by improving the details in an area that has a blurry or un-
clear picture.
Removes noise caused by compressing video.
You can adjust brightness of dark area and middle gray level area of the picture.
»
Low: Make the dark and middle gray level areas brighter.
y
Medium: Express the original picture level.
»
y
»
High: Make the dark and middle gray level area darker.
y
Sets black level of the screen to proper level. This function is available in the following modes:
TV(NTSC-M/J, PAL-M, PAL-N), AV (NTSC-M/J, PAL-M, PAL-N), HDMI or Component.
Auto: Sets black level of the screen to High or Low automatically according to the input
»
y
signal level.
Low: The reflection of the screen gets darker.
»
y
»
High: The reflection of the screen gets brighter.
y
Adjusts the brightness of the screen to prevent the screen from being too bright. Dims ex-
tremely bright pictures.
This feature is enabled in "Picture Mode-Standard, Game".
Description
, THX Cinema, THX Bright Room.
Description
Advertisement
Table of Contents
