Table of Contents
Advertisement
NOTE: There is no Undo when you use the 'Reset function'. To return to the previous function settings, you must adjust the functions again. 'Reset' will
set the clock and phase back to factory settings, activating auto adjust may be required and this will optimize the image for your system.
OSD Warning Messages
A warning message may appear on the screen indicating that the monitor is out of sync.
This means that the monitor cannot synchronize with the signal that it is receiving from the computer. Either the signal is too high or too low for the monitor to
use. See Specifications for the Horizontal and Vertical frequency ranges addressable by this monitor. Recommended mode is 1280 X 1024 @ 60Hz.
NOTE: The floating 'Dell - self-test Feature Check' dialog will appear on-screen if the monitor cannot sense a video signal.
Occasionally, no warning message appears, but the screen is blank. This could also indicate that the monitor is not synchronizing with the computer.
See
Troubleshooting
for more information.
Using the Dell™ Soundbar (Optional)
The Dell Soundbar is a stereo two channel system adaptable to mount on Dell Flat Panel Displays. The Soundbar has a rotary volume and on/off control to
adjust the overall system level, a blue LED for power indication, and two audio headset jacks.
1.
Headphone connectors
Downloaded from ManualMonitor.com Manuals
'Exit' leaves this submenu without resetting any values.
'All Settings' returns your monitor settings to those that were set at
the time of manufacture. This includes 'Color', 'Position', 'Clock
frequency', 'Phase', 'Brightness', 'Contrast' and 'OSD hold time'.
DDC/CI (Display Data Channel/Command Interface) allows you to
adjust the monitor parameters (brightness, color, balance, etc.) via
software applications on your PC.
You can disable this feature by selecting "Disable".
For best user experience and optimum performance of your monitor,
keep this feature enabled.
Hide quick links:
Advertisement
Table of Contents
