If you have VESA's DPMS compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in
use. This is referred to as 'Power Save Mode'. If input from keyboard, mouse or other input devices is detected by the computer, the monitor automatically
resumes functioning. The following table shows the power consumption and signaling of this automatic power saving feature:
VESA's Mode
ON
Power Saving
Switch Off
NOTE:
The
OSD
will only function in the normal operation mode. Otherwise one of the following messages will appear
depending upon the selected input.
Activate the computer and the monitor to gain access to the OSD.