Specifications - Makita GV5010 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Abrasive disc diameter
Rated speed (n)/No load speed (n
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
DOUBLE INSULATION
･
Wear safety glasses.
･
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an
recycling facility.
Intended use
The tool is intended for the sanding of large surface of
wood, plastic and metal materials as well as painted
surfaces.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Model
)
0
Overall length
Net weight
Safety class
equipment and
environmentally compatible
) : 83 dB(A)
pA
) : 94 dB(A)
WA
GV5010
125 mm
END202-6
Vibration
The vibration
determined according to EN60745:
Work mode: disc sanding
Vibration emission (a
Uncertainty (K) : 1.5 m/s
If the tool is used for other applications, the vibration
emission value may be different.
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
its
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
ENE052-1
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
ENF002-1
is running idle in addition to the trigger time).
For European countries only
EC Declaration of Conformity
We Makita
manufacturer declare that the following Makita
machine(s):
ENG102-3
Designation of Machine:
Disc Sander
Model No./ Type: GV5010,GV6010
are of series production and
Conforms to the following European Directives:
98/37/EC until 28th December 2009 and then with
2
GV6010
150 mm
-1
4500 min
181 mm
1.2 kg
/II
Wear ear protection
total value (tri-axial
) : 2.5 m/s
h,DS
2
Corporation as the
ENG228-5
vector sum)
2
or less
ENG901-1
ENH101-13
responsible