Makita GV5010 Instruction Manual
Hide thumbs
Also See for GV5010:
- Instruction manual (41 pages) ,
- Instruction manual (21 pages) ,
- Instruction manual (25 pages)
Related Manuals for Makita GV5010
Summary of Contents for Makita GV5010
-
Page 1: Disc Sander
INSTRUCTION MANUAL Disc Sander GV5010 GV6010 008944 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. -
Page 2: Specifications
AC supply. They EC Declaration of Conformity are double-insulated in accordance with European Makita Corporation responsible Standard and can, therefore, also be used from sockets manufacturer declare that the following Makita without earth wire. machine(s): ENG102-3 Designation of Machine: Noise Disc Sander The typical A-weighted noise level determined according Model No./ Type: GV5010,GV6010... - Page 3 Europe who is: Keep cord away from heat, oil, sharp edges or Makita International Europe Ltd, moving parts. Damaged or entangled cords Michigan, Drive, Tongwell, increase the risk of electric shock.
- Page 4 Power tool use and care and/or serious injury. 18. Do not force the power tool. Use the correct Operations such as grinding, wire brushing, power tool for your application. The correct polishing or cutting-off are not recommended power tool will do the job better and safer at the to be performed with this power tool.
- Page 5 area of operation. d) Use special care when working corners, 10. Hold power tool insulated gripping sharp edges etc. Avoid bouncing and snagging surfaces only, when performing an operation the accessory. Corners, sharp edges or bouncing where the cutting accessory may contact have a tendency to snag the rotating accessory and cause loss of control or kickback.
-
Page 6: Functional Description
operator safety. To stop the tool from the locked position, pull the switch 34. Do not use the tool on any materials trigger fully, then release it. containing asbestos. ASSEMBLY 35. Some material contains chemicals which may be toxic. Take caution to prevent dust inhalation and skin contact. -
Page 7: Maintenance
Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Plastic pad •... - Page 8 Makita Corporation Anjo, Aichi, Japan 884814C229...