Information On Disposal For Users (Private Households); System Settings Password; Turning The Power On And Off; Turning On The Power - Sharp MX-C250E Start Manual

Supplies
Standard supplies for this product that can replaced by the user
include paper and toner cartridges.
Be sure to use only SHARP-specified products for the toner
cartridges and transparency film.
For best copying results, be sure to use only
Sharp Genuine Supplies which are designed,
engineered, and tested to maximize the life
and performance of Sharp products. Look
for the Genuine Supplies label on the toner
package.
GENUINE SUPPLIES

Storage of supplies

Proper storage

1. Store the supplies in a location that is:
• clean and dry,
• at a stable temperature,
• not exposed to direct sunlight.
2. Store paper in the wrapper and lying flat.
3. Paper stored in packages standing up or out of the wrapper may
curl or become damp, resulting in paper misfeeds.

Storing toner cartridges

Store a new toner cartridge box horizontally with the top side up. Do
not store a toner cartridge standing on end. If stored standing on
end, the toner may not distribute well even after shaking the cartridge
vigorously, and will remain inside the cartridge without flowing out.

Supply of spare parts and consumables

The supply of spare parts for repair of the machine is guaranteed for at least
7 years following the termination of production. Spare parts are those parts
of the machine which may break down within the scope of the ordinary use
of the product, whereas those parts which normally exceed the life of the
product are not to be considered as spare parts. Consumables too, are
available for 7 years following the termination of production.
Information on Disposal for Users
(private households)
Attention: Your product is marked with this symbol. It means that used
electrical and electronic products should not be mixed with general
household waste. There is a separate collection system for these products.
In the European Union
Attention: If you want to dispose of this equipment,
please do not use the ordinary dust bin! Used
electrical and electronic equipment must be treated
separately and in accordance with legislation that
requires proper treatment, recovery and recycling of
used electrical and electronic equipment. Following
the implementation by member states, private
households within the EU states may return their used
electrical and electronic equipment to designated
collection facilities free of charge*. In some countries*
your local retailer may also take back your old product free of charge if you
purchase a similar new one.
* Please contact your local authority for further details. If your used electrical or
electronic equipment has batteries or accumulators, please dispose of these
separately beforehand according to local requirements. By disposing of this product
correctly you will help ensure that the waste undergoes the necessary treatment,
recovery and recycling and thus prevent potential negative effects on the environment
and human health which could otherwise arise due to inappropriate waste handling.
In other Countries outside the EU
If you wish to discard this product, please contact your local authorities and
ask for the correct method of disposal. For Switzerland: Used electrical or
electronic equipment can be returned free of charge to the dealer, even if
you don't purchase a new product. Further collection facilities are listed on
the homepage of www.swico.ch or www.sens.ch.

Information on Disposal for Business Users

In the European Union
If the product is used for business purposes and you want to discard it:
Please contact your SHARP dealer who will inform you about the take-back
of the product. You might be charged for the costs arising from take-back
and recycling. Small products (and small amounts) might be taken back
by your local collection facilities. For Spain: Please contact the established
collection system or your local authority for take-back of your used products.
In other Countries outside the EU
If you wish to discard of this product, please contact your local
authorities and ask for the correct method of disposal.

Turning the power on and off

Turning on the power

Switch the main power switch to the "

Turning off the power

Switch the main power switch to
the " " position.
• Before switching off the
main power switch, make
sure that the data indicator
and the line indicator are
off on the operation panel.
• When using the fax
function, always keep the
main power switch in the
"on" position.

Operation manuals

The instructions for this manual are separated in the following three sections.

Before using the machine

Start Guide: this manual
This section explains precautions to ensure safe usage, part names
and how to switch on/off the power. This section also includes
important information for persons that are responsible for the
maintenance of this machine.
Read this section before using the machine for the first time.
Printing and faxing from a computer
Software Setup Guide (PDF)
This section explains how to install the various drivers needed when
using this machine as a printer, network scanner, or fax machine.
Read this section when using this machine from a computer.
Directions for use
Operation Guide (PDF)
Information on the copier, fax, and other various functions that this machine
provides have been compiled into a PDF file called [Operation Guide].
Read the Operation Guide to learn how to use this machine, when you want
to know more about its functions, or when you have trouble operating it.

How to read the Operation Guide

The Operation Guide on the accessory CD-ROM provides detailed instructions
for operating the machine. The Operation Guide is provided in PDF format.
Insert the supplied CD-ROM into your CD-ROM drive. CD-ROM
will run automatically.
If it does not start automatically, double-click the CD-ROM icon or
display the contents of the CD-ROM and double-click "index.html".
To view the manual in PDF format, Acrobat Reader or Adobe Reader
of Adobe Systems Incorporated is required. If neither program is
installed on your computer, the programs can be downloaded from the
following URL: http://www.adobe.com/

System settings password

A password is necessary to change the machine's system settings using
administrator authority. System settings can be changed from either the
operation panel or using a computer web browser. After setting up the machine,
refer to [SYSTEM SETTINGS] in the Operation Guide to set a new password.
Password for logging in from this machine
The factory default password for the machine is "00000".
Password for logging in from a computer
There are two accounts that can log in from a web browser:
"Administrator" and "User". The factory default passwords for each
account are shown on the right side. Signing in as an "Administrator"
will allow you to manage all the settings available via web browser.
User
Administrator
Please take care not to forget newly set administrator passwords.
5
" position.
Main power
switch
Account Password
users users
admin admin