Booting Firmware - Nortel NN46225-300 Fundamentals

4
Firmware dialog box, Create tab fields
Field
FileName
Addr
Ctrl
Booting firmware
Use this procedure to boot a firmware file.
Procedure steps
Step
1
2
3
4
Copyright © 2005-2007, Nortel Networks
.
Click Apply to save the configuration.
Description
Specifies the path and filename of the firmware file.
Specifies the IP address where the new firmware file
is located.
The valid values are:
none The specified firmware file is not downloaded.
download Downloads the specified firmware file
Action
From the Device Manager menu bar, choose Edit > File System >
Firmware
The Firmware dialog box opens with the Update tab displayed.
Click the Boot tab.
The Firmware dialog box Boot tab appears (see
box, Boot tab" (page
Firmware dialog box, Boot tab
For information, see
Click Apply to save the configuration.
Reboot the device.
Nortel Metro Ethernet Routing Switch 8600
Fundamentals — Using Device Manager
NN46225-300 02.02 Standard
4.2 1 October 2007
Managing files on the Metro ESU 1850 67
—End—
67)).
"Firmware dialog box, Boot tab fields" (page
"Firmware dialog
68).