Installing Device Manager In A Unix Environment; Installing Device Manager On Linux From The Cd; Installing Device Manager On Solaris From The Cd - Nortel NN46225-300 Fundamentals

20 Installing Device Manager software
•

Installing Device Manager in a UNIX environment

Installing the Device Manager software in a UNIX environment includes:
1. Uninstalling the previous version of Device Manager
2. Installing the Device Manager software
The minimum system requirements for installing Device Manager on a PC
running the Linux Kernel 2.2 (or later) operating system are as follows:
•
•
•
The minimum system requirements for installing Device Manager on a UNIX
SPARC workstation running the Sun Solaris 8, 9, or 10 operating system
are as follows:
•
•
•

Installing Device Manager on Linux from the CD

Use this procedure to install the Device Manager software to a Linux
environment from the CD.
Procedure steps
Step
1
2

Installing Device Manager on Solaris from the CD

Use this procedure to install the Device Manager software to a Solaris
environment from the CD.
Copyright © 2005-2007, Nortel Networks
.
"Executing the Device Manager installation software on UNIX" (page 22)
4 MB available in a temporary directory
400 MB free in the directory where you want to install the Device
Manager software
512 MB DRAM
4 MB available in a temporary directory
400 MB free in the directory where you want to install the Device
Manager software
512 MB DRAM
Action
Navigate to the Linux/JDM subdirectory on the software CD.
Refer to steps 3 to 14 in
software on UNIX" (page 22)
to install the Device Manager software in a UNIX environment.
Nortel Metro Ethernet Routing Switch 8600
Fundamentals — Using Device Manager
NN46225-300 02.02 Standard
4.2 1 October 2007
"Executing the Device Manager installation
for the remaining instructions on how
—End—