Backlighting Adjustment - Monster 659 Owner's Manual

Backlighting adjustment

E
This function allows dashboard backlighting power setting.
To set the backlighting, access the "LIGHT SET" page of the
menu.
Press the switch (1, fig. 10) in position B "▼" for 3 sec in this
page to access the setup mode and the following pages will
be displayed in sequence:
- page 1 - "LIGHT MAX" setting:
This page sets backlighting to maximum brightness; press
switch (1, fig. 10) in position B "▼" to go to page 2.
- page 2 - "LIGHT MID" setting:
This page reduces the backlighting by approximately 30%
relative to maximum brightness; press switch (1, fig. 10) in
position B "▼" to go to page 3.
- page 3 - "LIGHT MIN" setting:
This page reduces the backlighting by approximately 70%
relative to maximum brightness; press switch (1, fig. 10) in
position B "▼" to go to page 1.
If you press the button (1, fig. 10) in position B "▼" for 3
seconds in one these three pages, the instrument panel goes
back to the "LIGHT SET" page and stores the selected
backlighting setup.
In the event of an interruption of the power supply from the
battery, when power is restored at the next Key-On, the
backlighting will be set by default to maximum brightness.
32
B= ON for 3 secs.
Press B
Press B
Press B
B= ON for 3 secs.
B= ON for 3 secs.
B= ON for 3 secs.
fig. 24