Kurzweil M3 User Manual page 9

Piano Assembly
Mounting the Keyboard
Pedal cable
➏ Screw for side panel
and keyboard
➒ Screw for side panel
and keyboard
Connecting the Power Supply
POWER
DC IN 24V
(The shape of the AC plug
differs depending on locale)
➊ Keyboard
➐ Screw for side panel
and pedal box
POWER
DC IN 24V
Place the keyboard on the stand and align with the
holes in the side panel brackets.
WARNING
The keyboard assembly will not safely sit unsupported on the
legs until all of the screws are in place. Have someone hold the
keyboard assembly while the screws are being secured.
Fasten the keyboard to the side panel using the
Fasten the keyboard to the front legs using the
screws.
Insert the pedal cable plug into the pedal jack located on
the bottom of the keyboard.
Rotate the pedal adjuster until it comes in firm contact
pedals will wobble and may malfunction.
Plug the thin DC power cord into the DC Power Jack on
the back of the M3 digital piano.
CAUTION
All DC power adapters are NOT the same!
Only use the DC power adapter supplied with the M3 digital
piano.
Connecting the wrong DC power adapter could damage the M3
digital piano.
If the power adapter is damaged or lost, contact your Kurzweil
Dealer to order a replacement.
Before connecting the M3 digital piano's power adapter,
ake sure that the Power switch (located on the bottom right
corner of the instrument) is in the off position.
Insert the plug of the AC power cord into the AC
connector on the Adaptor, then plug the other end of
the cord into the proper AC outlet on the wall. In some
areas a plug adaptor may be provided to match the pin
configuration of the AC wall outlets in your area.
Press the Power switch located on the right of the front
panel to turn the power on.
screws.
Preparation