Kurzweil M3 User Manual page 8

Preparation
2
Chapter
Piano Assembly
Stand Assembly
Side panel and Pedal box assembly
➌
➐
Rear panel and Side panel assembly
➑
➓ ➓
➒
Preparation
Use of incorrect screws can damage the product.
➋
➍ ➍
➎ ➎
Place the pedal box on the
prop and use screws to fasten the side panel.
Place the pedal box on the
screws to fasten the side panel.
You can find the pedal cable in the
Untie and straighten out the bundled pedal cable.
Align the rear panel's holes with the side panel brackets
and then use the screws to fasten the rear panel.
Use the screws to fasten the bottom of the rear panel.
Attach the able clamps to the rear panel as shown,
then clip the pedal cable into the clamps.
left side panel using the
right side panel and use
pedal box.