Finding & Editing a Song
Press the User Button located to the far left of the Rhythm bank.
Press the Prev or Next button to scroll through the list of User Presets (U1 – U20) to find your saved song.
Press the Play/Stop button to preview your saved song.
You are now ready for editing.
Erasing / Recording over Tracks
Select the user recorded song as above and press the Track button for the track you need to erase.
Press the Play/Stop button, then press the Record button and start playing into the track.
Press the Play/Stop button when you are finished.
Press the Save button to save the song with the new track.
Punch-Ins
Punching in is a way to correct mistakes on a recording without re-recording the entire track.
Select the user recorded song and press the button for the track you need to change.
Press the Play/Stop button.
Your song begins to play.
When it reaches the part you need to correct, press the Record button and play the note(s) you need to punch-
into the recording.
After the punch-in, press the Play/Stop button.
If you don't press the Play/Stop button after you Punch-In, you will erase the remaining portion of the track.
Press the Save button to save the song with the edited track.
Getting the most