Chapter 5 Getting The Most; Transpose Mode; Touch Sensitivity - Kurzweil M3 User Manual

Getting the most
5
Chapter

Transpose Mode

The Transpose parameter allows you to adjust the overall pitch of the keyboard up or down in semitone intervals.
Press the Transpose button to enter the Transpose mode.
"TRANSPOSE: 0" (factory default) is displayed on the LED Screen.
Press the Prev or Next buttons to transpose the pitch down or up by semitones.
The transposition has a range of -24 to +24. This offers a two octave transposition range down or up.
Pressing the Prev or Next button pair together, will reset the Transposition back to the factory default of 0.
Press the Transpose button to Exit the Transpose mode.
To save your transposition setting, press and hold any of the Fav 1 ~ Fav 4 buttons.

Touch Sensitivity

Adjust the keyboard touch sensitivity to your playing technique.
Press the Touch button to enter the Touch Sensitivity mode.
"TOUCH: LINEAR" (factory default) is displayed on the LED Screen.
Press the Prev or Next button to select the desired Touch sensitivity setting.
The following are the available settings:
LINEAR: Best Dynamic Range for instruments (Factory Default Setting).
LIGHT 1/2/3: For players with a light touch. Adjust this parameter to achieve a good dynamic range.These settings are
from LIGHT 1, a slightly light touch to LIGHT 3, a very light touch.
HARD 1/2/3: For players with a heavier touch. Adjust this parameter to achieve a good dynamic range. These settings
are from HARD 1, a slightly harder touch to HARD 3, a very hard touch.
PIANO TOUCH: Best for piano dynamics.
EASY TOUCH: Light touch, especially for younger players.
GM RECEIVE: Select this when playing General MIDI songs.
Pressing the Prev or Next button pair together will reset the Touch Ssensitivity setting back to the factory default of LINEAR.
Press the Touch button to Exit the Touch sensitivity mode.
To save your touch sensitivity setting, press and hold any of the Fav 1 ~ Fav 4 buttons.
Getting the most