Commissioning, Inspection, Maintenance; Steps - Commissioning, Inspection And Maintenance - Viessmann VITOPLEX 100 Service Instructions Manual

Steps - commissioning, inspection and maintenance

For further information regarding the individual steps, see the page indicated
• • •
• •
• •
• •
•
• • •
• • •
•
• •
• • •
• • •
• • •
• • •
• • •
• •
• •
• • •
• • •
• • •
• • •
Commissioning steps
Inspection steps
Maintenance steps
1. Commissioning the system...........................................
2. Shutting down the system............................................. 10
3. Closing the Vitoair draught stabiliser (if installed)...... 10
4. Opening the boiler door and cleaning cover............... 10
5. Cleaning the turbulators, heating surface, flue outlet
and flue pipe.................................................................... 11
6. Checking all gaskets and packing cords on the flue
gas side
7. Checking the thermal insulation components on the
boiler door
8. Inserting the turbulators................................................ 12
9. Securing the boiler door and cleaning cover............... 13
10. Checking connections and sensor well for leaks on
the heating water side
11. Checking the function of the safety equipment........... 13
12. Checking the expansion vessel and system pressure 14
13. Checking the firm seating of electrical plug-in
connections and cable grommets
14. Checking the thermal insulation
15. Checking the water quality............................................ 15
16. Cleaning the sight glass in the boiler door.................. 17
17. Checking the mixer for ease of operation and
tightness.......................................................................... 17
18. Checking the function of the return temperature
raising facility (if installed)
19. Checking the installation room ventilation
20. Checking the flue pipe for tightness

Commissioning, inspection, maintenance

Page
9
7