Advertisement
Standard 1.1
9
You can configure the Remote Gateway 911x series unit through the telephone
set. The procedure is the same for either the Remote Gateway 9110 circuit card or
9115 unit. Before you begin, your System Administrator must supply you with a
completed Remote Gateway 911x series telephone menu — Configuration Values
form. Use the information provided on this form to configure the Remote
Gateway 911x series unit.
Note: The procedure to configure the Remote Gateway 911x series unit
establishes a connection between the unit and the RLC. The System Administrator
can then configure the other parameters through the network connection.
If your System Administrator has already configured your unit, you do not need to
complete the configuration procedure.
When working with the Remote Gateway 9100 Series telephone menu, use the
following table as a guide for the proper keys to use:
Advertisement
