Standard 1.1
10
Note: If, at any time while working with the telephone set menu, you make a
mistake, you can return to the previous level in the menu system by pressing the
Release (Rls, R, or Goodbye depending on your telephone set) key once.
After installing the Remote Gateway 911x series unit and powering up:
Press the Release key four times within three seconds to access the telephone
1
menu.
Result: The telephone display prompts you for a user name:
Enter User Name
Press the Rls key to exit.
Enter 48378 (GUEST) on the telephone keypad and then press Hold.
2
Result: The telephone display prompts you for a password:
Enter Password
Press the Rls key to exit.
Enter 48378123 (GUEST123), the default password, or the current password
3
if you have customized the password and then press Hold.
Result: The telephone display prompts you to display the Remote Gateway
911x series unit's IP parameters:
Display Local IP?
[1-Yes 2-No]
Use the information provided on the Remote Gateway 911x series telephone
4
menu — Configuration Values form to respond to each telephone display
prompt and make the appropriate menu selection. Refer to
Contact your System Administrator if you experience any problems configuring
the Remote Gateway 911x series unit.
" on page 9
for further assistance.
"