AEG MRC 4122 F Instruction Manual page 67

Setting of the Alarm
You can set two alarm times. Proceed as follows:
1. Press the AL.SET button (11) for approximately 3 seconds. The display shows
"ALARM 1 " and the number of the actually set alarm time starts to flash.
2. Use the buttons
3. Press the AL.SET button for confirmation. The minutes start to flash.
4. Use the buttons
5. Now select the days you want the alarm to sound. The following selections can be
made:
• Monday to Friday
• Monday – Saturday
• Monday – Sunday
6. Press the AL.SET button to set the second alarm time. Proceed as described above for
the setting.
NOTE:
• If you want to set only the first alarm time, press the AL.SET button until the time
is displayed again.
• Press the AL.SET button to display the set alarm times for a short time.
Radio alarm
After you have set the alarm time and a radio station, press the AL.1
AL.2 button (back of the unit). Press the button until the symbol "ALARM 1 " or
"ALARM 2 " is shown.
NOTE:
As soon as the alarm time is reached, the radio is switched on. The selected radio station
plays at the set volume.
Buzzer alarm
If you do not want to be wakened with a radio station, press the AL.1
AL.2 button (back of the unit) until the symbol "ALARM 1
shown on the display.
NOTE:
• Instead of the radio, the buzzer goes off when the alarm time is reached.
• The volume of the signal tone cannot be changed.
(9) and (10) for setting.
and for setting.
English
67
button or the
button or the
" or "ALARM 2 " is