The Configuration Screen; Configuring The Inserter - Neopost DS-140 Operator's Manual

5.9 The Configuration screen
From this screen you edit configurations that were created in the List Box after clicking the
'Configuration' button in the Setup screen (see page 19) or click on 'New' if creating a new
configuration. A configuration applies the settings to be used for the envelope inserter and
all the stations fitted, which is then associated with a Job (see page 38). You can rename
a new configuration by clicking on the name button and editing as required, either by
typing or by using the on-screen keyboard. Warning! Do not change the name of an
existing configuration that is associated with a current job. If you do, the factory
configuration 'Default Config' will be substituted.
5.9.1
Configuring
the inserter.
Select the required
envelope and click 'Ok'
Note: An error will occur if an
envelope that is used in any
configuration has been deleted
from the list box in the Setup
screen (see page 19).
140 Operator Manual
Click the upper icon on the 'Head' part of the graphic (showing the
envelope icon). This displays the list of available envelopes to allow
you to select one (see page 27 for creating Envelopes). If the machine
has more than 6 stations, use the scroll arrows to move sideways.
.
29