Advertisement
2.2 Register IAX2 Extension
To register an IAX2 extension with MyPBX. Click "IAX2" tab, and configure as below.
1) Status: showing the IAX2 account status.
2) Server Address: enter the IP address of your MyPBX, in this guide is
192.168.3.217.
3) Server Port: enter the default IAX2 port of your MyPBX, 4569.
4) Account: the extension number which you want to register.
5) Password: enter the password of the extension.
6) Phone Number: enter the extension's caller ID.
7) Voice Mail Number: same as the feature code of entering VM box which is set
in MyPBX. In this guide, enter *2.
8) Enable Registration: checked.
Click the "Apply" button at the bottom of the page, and check the status. The
status "Registered" indicates the extension is registered to MyPBX.
2.3 Use IAX2 on Fanvil
1.
Click on the "Function Key" tab on the left side to enter the page.
2.
You can configure a "Line Key" or "Function Key" to activate IAX2 line. The
default function of the 4 "Line key" is to activate the 4 SIP lines. Now we configure
"DSS Key4" to activate IAX2 line. Configuring it as below:
Fanvil IP Phone Configuration Guides
6/13
Advertisement
