Specifications - HP elite usb-c User Manual

5

Specifications

Input power
The power information in this section may be helpful if you plan to travel internationally with the dock.
The dock operates on DC power, which can be supplied by an AC or a DC power source. The AC power source
must be rated at 100–240 V, 50–60 Hz. Although the dock can be powered from a standalone DC power
source, it should be powered only with an AC adapter or a DC power source supplied and approved by HP for
use with this dock.
The dock can operate on DC power within the following specifications.
Input Power
Operating voltage and current
NOTE: This product is designed for IT power systems in Norway with phase-to-phase voltage not exceeding
240 V rms.
NOTE: The dock operating voltage and current can be found on the dock's regulatory label.
Operating environment
Factor
Temperature
Operating (writing to optical disc)
Nonoperating
Relative humidity (noncondensing)
Operating
Nonoperating
Maximum altitude (unpressurized)
Operating
Nonoperating
20 Chapter 5 Specifications
Rating
19.5 V dc @ 3.33 A – 65 W
Metric
0°C to 40°C
-40°C to 70°C
5% to 95%
5% to 90%
-15 m to 3,048 m
-15 m to 9,144 m
U.S.
32°F to 104°F
-40°F to 158°F
5% to 95%
5% to 90%
-50 ft to 10,000 ft
-50 ft to 30,000 ft