Turning On And Off The Camera - Nikon COOLPIX S8000 User Manual

Turning On and Off the Camera

To turn on the camera, press the power switch. The
power-on lamp (green) will light for a moment and the
monitor will turn on.
To turn off the camera, press the power switch again.
When the camera is turned off, both the power-on
lamp and monitor will turn off.
If the camera is turned off, hold down the c button to turn the camera on in
playback mode (A 29).
C
Power Saving Function (Auto Off)
If no operations are performed for a while, the monitor will turn off automatically, the camera will
enter standby mode, and the power-on lamp will blink. If no operations are performed for another
three minutes, the camera will turn off automatically.
• If no operations are performed for about a minute (default setting) in shooting or playback mode,
the camera will enter standby mode.
• When the monitor has turned off in standby mode (the power-on lamp is blinking), press the
following button to reactivate it.
- Power switch, shutter-release button, A button, c button, or b (movie-record) button
• The time allowed to elapse before the camera enters standby mode can be changed from the
Auto off option (A 137) in the setup menu (A 124).
Charging the Battery
17