Product Specifications; Intended Use - Bosch PEX 250 AE Operating Instructions Manual

Product Specifications

Eccentric Sander
Order number
Rated input power
Power output
No-load speed
No-load oscillations rate
Speed selection
Eccentricity
Sanding plate dia.
Weight (without accessories) approx.
Protection class
Please observe the order number of your machine. The trade names of the individual machines may vary.
Product Elements
1 Speed selector thumbwheel
(PEX 250 AE/PEX 270 AE)
2 On-Off switch
3 Locking button for On-Off switch
4 Dust box (micro-filtersystem)
5 Sanding plate
6 Sanding sheet*
7 Holder
8 Outlet piece
9 Latching lever
10 Filter element (micro-filtersystem)
11 Backing plate
12 Screws (TX 20)*
13 L-type Torx key (accessory kit)*
14 Extraction adapter*
* Optional accessories
Not all the accessories illustrated or described are in-
cluded in standard delivery.
Noise/Vibration Information
Measured values determined according to EN 50 144.
The A-weighted sound pressure level of the product is
typically 83 dB(A). The noise level when working can
exceed 85 dB(A).
Wear ear protection!
The typical weighted acceleration is 6,0 m/s
2 609 932 217 • (02.05) T
PEX 250 AE
0 603 369 7..
[W] 250
[W] 125
[RPM] 7500–12000
[RPM] 15000–24000
G
[mm] 4.0
[mm] 125
[kg] 1.5
/ II

Intended Use

The machine is intended for dry sanding of wood,
plastic, metal and filler material as well as painted sur-
faces.
Machines with electronic control are also suitable for
polishing.
If the cable is damaged or cut through while work-
I
ing, do not touch the cable but immediately pull the
mains plug. Never use the machine with a dam-
aged cable.
Connect machines that are used outdoors by
I
means of a fault current protection switch (FI) with
a maximum triggering current of 30 mA. Use only
an extension cable that is approved for outdoor
use.
Wear safety glasses.
I
Safety gloves are recommended.
I
Insert the mains plug into the socket only when the
I
2
. machine is switched off.
English–1
PEX 270 A PEX 270 AE
0 603 369 0.. 0 603 369 7..
270 270
125 125
12000
24000 15000–24000
G
–
4.0 4.0
125 125
1.5 1.5
/ II
For Your Safety
Working safely with this machine is
possible only when the operating
and safety information are read
completely and the instructions
contained therein are strictly fol-
lowed.
In addition, the general safety
notes in the enclosed booklet must
be observed.
Before using for the first time, ask
for a practical demonstration.
7500–12000
/ II