Mitsubishi Electric DR854 User Manual page 35

Continued from previous page.
HEAT STATUS
Information of status for COOLING FAN, BRIGHTNESS and TEMPERATURE.
COOLING FAN comes to run when inside temperature is over a guaranteed limit.
In this case warning is displayed on the screen.
POWER ON DELAY
Adjusts the delay time from "standby" to "power on" mode.
"POWER ON DELAY" time is selectable from 0-50 seconds.
DATE AND TIME
Adjusts the current date and time for internal clock.
You should set this function when you use "SCHEDULE".
SCHEDULE
Programs the monitor's working schedule.
Schedule the power on and power off with hour and a day of the week. Also sets the input port.
This OSD can't remove except EXIT.
(See "HOW TO SETUP SCHEDULE" on page 32.)
HDMI INPUT MODE
Select "HDMI-PC" when PC or other computer equipment is connected via HDMI.
Select "HDMI-HD" when DVD player, which has HDMI output, is connected via HDMI.
DVI INPUT MODE
Select "DVI-PC" when PC or other computer equipment is connected via DVI-D.
Select "DVI-HD" when DVD player, which has HDMI output, is connected via DVI-D.
MONITOR ID
ID numbers for remote control are assigned to MDT421S monitors that are multi-connected via RS-232C.
ID numbers 1 to 26 are selectable.
DDC/CI
Use to turn ON or OFF the DDC/CI communication function. Select ON for normal use.
SYNC TYPE
* : INPUT RGB3, 4 only
Select "0.3V" for 0.3 Composite Sync.
Select "TTL" for TTL Sync.
ADVANCED OPTION RESET
Selecting ADVANCED OPTION RESET allows you to reset all OSD settings from ADVANCED OPTION settings,
except for DATE AND TIME, SCHEDULE, HDMI INPUT MODE, DVI INPUT MODE, MONITOR ID, and DDC/CI.
Select "YES" and press "SET" button to restore the factory preset data.
Press "EXIT" button to cancel and then return the previous menu.
English-31