Table of Contents
Advertisement
Available languages
Available languages
INSTRUCTION fOR USE
Fitting wire beater / dough hooks.
One of the beaters / dough hooks is equipped with the ring.
Insert the beater / dough hook with the ring into the opening with mark. If you put to into the
other opening, appliance will not work right. Insert the next beater / dough hook into the second
opening.
Use tha hand mixer
Insert the beaters or dough hooks according the instruction „Fitting wire beater / dough hooks"
(Fig.1).
1)
Plug in the appliance.
2)
Depending on the quantity to be prepared. Place the ingredients in an appropriate container.
3)
Plunge the beaters or hooks into the container and start the appliance by press the ON/OFF
key P1 and set the speed. (Fig.2)
4)
For maximum speed press and hold TUBRO knob.
5)
When you have finished using it, press the ON/OFF knob to positoon „0", to switch the mixer
off.
6)
Unplug the appliance.
7)
Eject the beaters or dough hooks by pushing the eject handle. (Fig.4)
Use tha hand mixerwith bowl
1)
Place the bowl in the stand. (Fig.5)
2)
Insert the beaters or dough hooks according the instruction „Fitting wire beater / dough
hooks".
3)
Mount the main unit onto the bracket. (Fig.6)
4)
Insert the bowl cover until it is locked in place. (Fig.7)
5)
Plunge the beaters or hooks into the bowl by press the Stand knob P8.
6)
Start the appliance by turning the control knob P1 to the right in position "1"~"5". (Fig.8)
7)
Take out the main unit. Please press the bracket button P9 (Fig.9).
8)
When turn the bracket ,you must be press stand button P8 (Fig.10).
ENG - 24
Advertisement
Table of Contents
