Cabinet Maintenance; Specifications - Pioneer KRP-S03 Operating Instructions Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

CABINET MAINTENANCE

• Use a polishing cloth or dry cloth to wipe off dust and dirt.
• When the cabinet is very dirty, wipe with a soft cloth
moistened with water-diluted cleanser; then wipe again
with a dry cloth. Do not use furniture wax or cleaners.
They may damage the surface of the cabinet.
• Never use thinner, benzine, insecticide sprays and other
chemicals on or near the cabinets, since these will
corrode the surfaces.
• When a chemical cloth is used, read the cautions for the
chemical cloth carefully.
If you want to dispose this product, do not mix it with general household waste. There is a separate collection system for used
electronic products in accordance with legislation that requires proper treatment, recovery and recycling.
Private households in the member states of the EU, in Switzerland and Norway may return their used electronic products free of charge to
designated collection facilities or to a retailer (if you purchase a similar new one).
For countries not mentioned above, please contact your local authorities for the correct method of disposal.
By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential
negative effects on the environment and human health.

SPECIFICATIONS

Cabinet ............................................................ Bass-reflex type
Used speaker (two-way system):
Woofer (for low tones) ............... 4.8 cm × 13 cm cone type
Tweeter (for high tones) ....................2.5 cm semidome type
Impedance ........................................................................... 6 Ω
Frequency Range ........................................60 Hz to 30 000 Hz
Sensitivity (1 m, 1 W) ....................................................... 80 dB
Permissible input :
Max. input ...................................................................... 18 W
Rated input ..................................................................... 6 W
Crossover frequency ........................................................3 kHz
External Dimensions
.................................82 (W) mm × 723 (H) mm × 64 (D) mm
Weight :
Speaker (one piece) ......................................................1.5 kg
Speakers (pair) with cables, brackets and screws .... 3.5 kg
Accessory parts (for two speakers)
................................................................ Speaker Cables × 2
.................................................................... Speaker Brackets
................... Speaker Mounting Screws (M5 × 10 mm) × 16
.................................................................. Padding strips × 2
.................................................... Operating Instructions × 1
NOTE:
Specifications and design subject to possible modification
without notice, due to improvements.
English
TOP-Left × 1
BOTTOM-Left × 1
TOP-Right × 1
BOTTOM-Right × 1
K058_A_En
Published by Pioneer Corporation.
Copyright © 2008 Pioneer Corporation.
All rights reserved.
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents