Nortel 4060 User Manual page 16

Set up the DECT Handset 4060
d
OK
OK
d
OK
d
OK
d
OK
16
8. Choose one of the following:
— if you are at a location where two
DECT systems overlap, use the
keypad to enter the system
identification number at the
prompt and press the
— if you are at a location where there is
only one DECT system, press the
OK soft key.
9. Use the keypad to enter the
authentication code at the
prompt and press the
10. Use the keypad to enter the system
name at the System Name
press the OK
11. Use the keypad to enter the local
number at the
and press the
OK soft key.
Auth.Code
OK soft key.
prompt and
soft key.
Local Number prompt
OK soft key.
PARK