Turning On The Power; Leveling - LG LTNS16121V Owner's Manual

Turning On the Power

1. Plug in the refrigerator.
CAUTION
Connect to a rated power outlet.

 Have a certified electrician check the wall
outlet and wiring for proper grounding.
Do not damage or cut off the ground terminal

of the power plug.

Leveling

After installing, plug the refrigerator's power cord
into a 3-prong grounded outlet and push the
refrigerator into the final position.
Your refrigerator has two front leveling legs (one on
the right side and one on the left). Adjust the legs to
alter the tilt from front-to-front or side-to-side. If the
refrigerator seems unsteady, or you want the doors
to close more easily, adjust the refrigerator's tilt
using the instructions below:
1. Turn the leveling legs by inserting a flat blade
screwdriver in the holes located in the leveling
screws. Turn the leg clockwise (
side of the refrigerator or counterclockwise (
to lower it. It may take several turns of the
leveling leg to adjust the tilt of the refrigerator.
) to raise that
)
Leveling
Screw
Screwdriver
NOTE
Having someone push backward against the top
of the refrigerator takes some weight off the
leveling legs. This makes it easier to adjust the
legs.
2. Open both doors again and check to make sure
that they close easily. If the doors do not close
easily, tilt the refrigerator slightly more to the rear
by turning both leveling legs counterclockwise. It
may take several more turns, and you should turn
both leveling legs the same amount.
INSTALLATION 12