Table of Contents
Advertisement
ENGLISH
5
PART NAMES AND FUNCTIONS
(1) Front Panel
See page 3.
q
Power button
• Press once to turn the power on.
• Press again to set to the "OFF" position and
turn the power off.
• Set the power to the standby mode by pressing
the POWER OFF button on the remote control
unit while the power is on.
• Turn the power on from the standby mode by
pressing the POWER ON button on the remote
control unit.
w
Power indicator
• This indicator lights when the power is on and
when the power is in the standby mode.
e
Disc tray
• Load discs here. (See page 12.)
!8
• Press the OPEN/CLOSE button
close the disc tray.
• The disc tray is also closed when the PLAY
r
button
is pressed.
r
PLAY button (
1
)
• Press this button to play the disc. (See page 21.)
t
SEARCH MODE button
• Press this to change the search mode to
search for groups or titles, tracks or chapters
when selecting sections of discs directly
using the number buttons or SKIP buttons.
y
STILL/PAUSE button (
3
)
• Press this button to pause images or music or
to play images frame by frame. (See page 22.)
u
STOP button (
)
2
• Press this to stop the disc. (See page 22.)
i
Skip button (
8
)
• Press this to move back to the beginning of the
current track (or chapter).
• Press again to move back to the beginning of
the previous track (or chapter). (See page 22.)
o
Skip button (
9
)
• Press this to move ahead to the beginning of
the next track (or chapter). (See page 22.)
!0
Slow/Search button (
6
)
• Press this to set the slow play mode and to
search in the reverse direction. (See page 22.)
10
!1
Slow/Search button (
7
• Press this to set the slow play mode and to
search in the forward direction. (See page 22.)
!2
PROGRESSIVE button
• Press to switch the progressive video output
mode between progressive and interlace.
(See psge 16.)
This function does not work when a CD is
playing.
!3
PURE DIRECT VIDEO button
• Press to switch the video output between on
and off.
• When the power is turned off, the setting is
restored to the default value.
(The default value is ON.)
to open and
!4
SRS TS button
• Sets the virtual surround sound.
(Functions when playing DVD-videos or VCDs
only. See page 23.)
!5
PURE DIRECT DIGITAL button
• Press to switch the audio output between on
and off.
• When the power is turned off, the setting is
restored to the default value.
(The default value is ON.)
!6
PURE DIRECT DISPLAY button
• Press to switch the indicate in Display of the
main unit between on and off.
• When the power is turned off, the setting is
restored to the default value.
(The default value is ON.)
• Even when the display is turned off, it lights
for about 2 seconds when any button other
than the DIMMER button is pressed.
!7
Setting the playback area/layer of
Super audio CD
(SUPER AUDIO CD SETUP)
• Switch the area/layer of the Super audio CDs
played with priority.
!8
OPEN/CLOSE button (
• Press this button to open and close the disc
tray.(See page 12.)
!9
Display
• Information on the disc that is currently playing
is shown on the display. (See page 10.)
@0
Remote control sensor
(2) Rear Panel
@1
Component video output connectors
(COMPONENT VIDEO OUT)
)
• Connect using video cords (available in stores).
@2
Video output connector (VIDEO OUT)
• Connect using the included audio video cord.
@3
S-Video output connector
(S-VIDEO OUT)
• Connect using an S-Video connection cord
(available in stores).
@4
Audio output connectors
(AUDIO OUT)
• Connect using the included audio video cord.
@5
Digital audio output connector
(COAXIAL)
• Connect using an digital audio cord. Connect a
commercially available 75 Ω/ohms pin-plug cord.
• Digital data is output from this connector.
@6
Digital audio output connector
(OPTICAL)
• Connect using an optical fiber cable (available in
stores).
• Digital data is output from this connector.
(3) Display
Lights to indicate the currently playing disc.
Lights in the repeat play mode.
These light to indicate the names of the
sections of the disc being played.
)
5
Lights when progressive video
signals are being output.
Lights in the still/pause mode.
Lights during playback, flashes when the resume play memory function is activated.
@7
Control output connector
(ROOM TO ROOM/OUT)
• This is the output connector for wired remote
control.
Consult your DENON dealer if you wish to use
this connector.
@8
Control input connector
(ROOM TO ROOM/IN)
• This is the input connector for wired remote
control.
Consult your DENON dealer if you wish to use
this connector.
@9
21-pin SCART terminal (AV1)
• Connect using a 21-pin SCART cable (available
in stores).
#0
Power input (AC IN)
• Connect to AC power supply using the included
power supply cord.
Lights to indicate the currently playing
audio channel.
Lights during playback of multiple angles disc.
L:
Lights when the audio signals can
C:
be down-mixed.
R:
Lights in the programmed play mode.
SL: Surround left channel
S:
Lights in the random play mode.
SR: Surround right channnel
LFE: Low frequency effect
These light to indicate
the time display mode.
Displays the title, track number
Lights to indicate the currently playing
and elapsed time during
audio format.
playback.
Lights when SRS TruSurround is on.
Front left channel
Center channel
Front right channel
Mono surround channel
Lights to indicate the
currently playing video
type.
F: Film source
V: Video source
G: Graphic source
Advertisement
Chapters
Table of Contents
