Functions Available When Busy - Samsung SMT-i3100 Quick Reference Manual

Functions Available In Standby
Function
Check missed calls
Bell sound setting
Viewing received
messages
Sending a message
Call Forward
Call Pickup
Do Not Disturb (DND)

Functions Available When Busy

Function
Volume Control
Call Hold
Call Transfer
Group Listen
Mute
When in standby, select the [Menu] soft button
[Call log] [Missed ] to check the numbers for the missed
calls.
When in standby, select the [Menu] soft button
[Sound] [Ring Tone] to set the bell sound.
When in standby, select the [Menu] soft button
[Message] [Inbox] to view the received messages.
When in standby, select the [Menu] soft button
[Message] [New Msg.] to send a message.
When in standby, select the [Menu] Soft button
[Call FWD], and enter the destination number.
When in standby, select one of the pick-up functions from
the [SVC] soft button to change settings.
When in standby, select the [SVC] soft button
[Do Not Disturb] [On/Off].
To increase or decrease the volume, you can adjust the
volume using the [Vol] button. This function is available for
handset, speaker mode.
Press the [Hold] button when busy. An On ex-hold message
is displayed on the LCD screen (in handset mode) or change
state Idle mode (in speaker mode).
Press the [Transfer] button when busy. Once a dial tone is
heard, dial the phone number to call.
When the called party is busy or does not want to receive the
call, press the [Transfer] button again to resume the
previous call.
When busy, select the [SVC] soft button
LISTEN], and press the [OK] button.
Then the conversation can be heard, not only through the
handset, but also through the speaker. To release this
function, select the [listen (Off)] from the service menus.
When busy, press the [Mute] button, then the your voice is
muted to the other party.
To release this function, press the [Mute] button again.
Description
Description
[GROUP
3
English _