Specifications; Ec Declaration Of Conformity - Makita DP3002 Instruction Manual

ENGLISH (Original instructions)
1-1. Switch trigger
1-2. Lock lever
2-1. Reversing switch lever
3-1. Hook

SPECIFICATIONS

Model
Capacities
No load speed (min
Overall length
Net weight
Safety class
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for drilling in wood, metal and plastic.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. This tool
should be grounded while in use to protect the operator
from electric shock. Use only three-wire extension cords
which have three-prong grounding-type plugs and
three-pole receptacles which accept the tool's plug.
Noise
The typical A-weighted noise level determined according
to EN60745:
Model DP3003
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Model DP4001,DP4002,DP4003
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Wear ear protection
Vibration
The vibration total
determined according to EN60745:
Model DP3003,DP4001,DP4002,DP4003
Work mode: drilling into metal
Vibration emission (a
Explanation of general view
5-1. Side grip
5-2. Teeth
5-3. Protrusions
6-1. Sleeve
Steel
Wood
-1
)
) : 81 dB(A)
pA
) : 92 dB(A)
WA
) : 82 dB(A)
pA
) : 93 dB(A)
WA
value (tri-axial vector
2
) : 2.5 m/s or less
h,D
DP3002 DP3003
10 mm
32 mm
0 - 1,200
304 mm 296 mm
2.4 kg 2.2 kg
ENE032-1
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
ENF001-1
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
ENG905-1
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
For European countries only

EC Declaration of Conformity

We Makita
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
ENG900-1
Drill
Model No./ Type: DP3003,DP4001,DP4002,DP4003
sum)
are of series production and
Conforms to the following European Directives:
2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
3
6-2. Ring
7-1. Chuck key
8-1. Depth gauge
DP4000 DP4001
13 mm
38 mm
0 - 900
304 mm 308 mm
2.5 kg 2.4 kg
/II
2
Corporation as
DP4002 DP4003
0 - 600
304 mm 308 mm
2.7 kg 2.5 kg
ENG901-1
ENH101-14
the responsible