Slider S, T Ass'y Removal; Plate Ground Deck, Cylinder Ass'y Removal - Sony SLV-SE740B Service Manual

QQ
3 7 63 1515 0

2-3-23 Slider S, T Ass'y Removal

1) Move the Slider S, T Ass'y 1, 2 to slot, and then lift it to remove.
(Refer to arrow)
1 SLIDER S ASS`Y
Fig. 2-34 Slider S, T Ass'y Removal
TE
L 13942296513
www
.
http://www.xiaoyu163.com
2 SLIDER T ASS`Y
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8

2-3-24 Plate Ground Deck, Cylinder Ass'y Removal

1) Remove the 3 Screws 1.
2) Lift the Plate Ground Deck 2.
3) Lift the Cylinder Ass'y 3.
Assembly:
1) Match the 3 holes in the bottom of Cylinder Ass'y 3 to the 3
holes of Main Base as attending not to drop or knock the Cylinder
Ass'y 3.
2) Tighten the 1 Screw 1.
3) Match the Plate Ground Deck 2 to the Hole of Base Main.
4) Tighten the other 2 Screws 1.
Note:
1) Take care not to touch the Cylinder Ass'y 3 and the tape guide
post at reinstalling.
2) When reinstalling, Don't push down too much on Screw Driver.
Q Q
3 6 7 1 3
Fig. 2-35 Plate Ground Deck, Cylinder Ass'y Removal
.
2-18
9 4 2 8
1 3 SCREWS
2 PLATE GROUND DECK
1 5 0 5 8 2 9 9 4
3 CYLINDER ASS'Y
m
co
9 9
2 8 9 9